HELTER SKELTER

Home
Polaris
Axys
HELTER SKELTER

Axys

HELTER SKELTER

color options

Helter Skelter

Corsair

Melon Mania

Stealth

Lychee

Ice

Wine Out

Valencia

starting at

$275.00

Description

Our customizer has 2 versions, the CLASSIC is best on mobile devices and has limited customization. The CUSTOMIZER works best with computers due to the advanced customization abilities.

We use an exclusive Made in the USA wrap material with air release and easy repositioning. Our standard laminate is the industry standard 10mils thick while our PRO SERIES provides greater protection for better durability and value at a whopping 15mils thick.

Our designers can also help you with any logos and designs that are not listed on the site. More info is available in the Frequent Questions section or ask for help on the contact us page.

Ordering

The process

Step

Select
Your Design

Step

Fully Customize Design
or
Buy Current Colorway

Step

Select Logos
Personalize Design
& Select Finish

Step

Purchase
Your Design

Step

Brap Wrap
Prints & Ship
Your Wrap!

Faq's

Frequently asked questions

All about logos

We do not have all of our thousands of logos on the customizer so if the one you want is not shown, just ask!
We will also color match the non-changeable logos to your wrap. If there are specific colors you want just let us know in the comments.
To add a custom logo, place text with ("LOGO1" etc) where you want the logo to appear. Then include the name of the logo in the additional information section.
During the proofing process you can uplaod or email the logo to us(If possible, please provide a vector file: .AI, .PDF, .SVG, .EPS are recommended).
If the correct file type is not provided, design time may require additional fees.

What if there is a color I want that isn’t available in the customizer?

While we do have a wide variety of colors, we do understand that sometimes you need an exact match. To do so, please choose a color option that closely resembles the desired color and in the "additional information" section, tell us which color it is (color 1, color 2, text, logo, etc) and tell us the color you need. Please be sure to give us the RGB, or CMYK value. During the proofing process we will try to match the desired color as close as possible.

What if I want a completely custom design?

We have the capability to do fully custom designs. However, there will be an additonal base design fee (Depending on the complexity of the design it may require an hourly fee). Contact one of our designers to talk about options.

What is the difference between regular and pro series laminate?

Our pro series laminate is 15Mil thickn while our regular is 10Mil thick, it exceeds industry standards and provides additional protection for your wrap.

What happens after I place my order?

Once your order is placed, we will get a proof out to you in 2-5 business days (depending on backlog) via email. Once the design is approved, your wrap will be sent to production where it wll printed, quality checked and sent to you.

When will you have discounts on sled wraps?

We pride ourselves on having the industries best customizer, support, and value. Due to our collaboration with partner companies we are able to provide better pricing every day because of the sheer volume of printing we do. Unlike some of our competitors that try to lure you in with everything on sale all the time, we just offer everything in first sentence all the time. That said, end of season, special events, and freshen up damaged wraps will occasionally lead to discounts. The snow show season are our biggest sales of the year. Follow our socials to be notified about updates relating to discounts

Can I rush my order?

Yes, you can rush your order. However, there will be an additional rush charge fee on top of the cost of faster shipping. Please contact our shop if you would like rush your order.

Do we provide sponsorships, dealer, or rider discounts?

Yes, we can provide options for sponsorships, dealer, and rider discounts. However, they are subject to approval by the team.
Check out our about page to fill out an application or contact one of our designers to talk about options.
(We are not required to provide discounts/sponsors to everyone)

When will you have discounts on sled wraps?

Can you do discounts on bulk orders?

Depending on the situation we can provide a bulk deal on many of our products. The best thing to do would be to contact our shop and speak with one of our designers. We are not required to provide bulk pricing for our products. They are custom and unique to every project.

You don’t have an option for my machine?

In some cases we do not have templates for certain models. Older or less popular models are hard to get and don’t have easy to access templates. Contact our shop and let us know the year, make, model and/or tunnel length and we will do our best to track down templates. In some cases they may not exist so we will have to create our own. Both situations may result in additional fees.

The graphics do not fit around my after market bumpers/parts?

Our templates are entirely based around stock parts and bumpers for each sled. We do not have templates for aftermarket bumpers. If this is a major concern, speak with one of our desginers and they can make some minor adjustments to the wrap. Additional fees may be required.

Should I put my wrap on before my after market bumpers?

Yes, installing your after market parts after may ensure that the wrap is installed effectively. It will help to avoid any problems that may occur in the future.

Why is the wrap on my gas tank bubbling?

Gas fumes will escape through the plastic tanks on all sleds and can get trapped under the wrap. During of periods on non use especially in warmer conditions this can occur.

How do I get bubbles out?

Use a exacto knife of rezor blade to poke a hole in the bubble and press the air out. Use extra heat and pressure to try and remove all the air.

What are the coverage options for my wrap?

Choosing the coverage you would like using the image below shows what each option covers. (note: Full coverage is selected at the beginning of customization.)

Do we provide a warranty on our graphics/wraps?

In the extremely rare instance that there is an issue with your wrap such as the laminate seperating from the vinyl we will certainly work with you to make it right. If it appears that it was due to our error, please email pictures to one of our designers at [email protected] and we will make a determination based on the information that is provide.

The main issue we are met with is the decals coming loose and desticking from the surface. Because of the super sticky adhesive we use, 99 times out of 100, this is an installation issue. To avoid this:
1) CLEAN the entire surface with denatured alcohol to remove all waxes, oils, etc.
2) Clean your hands well to remove all oils and sweat.
3) Use moderate to firm pressure to lay the decals down.
4) Heat the decals with a hiar dryer or heat gun to completely activate the adhesive. (practice this with some of the spare sections of vinyl to ensure that you do not burn or shrink the vinyl.

I messed up a piece on my sled/bike, can you reprint singular pieces?

Yes, please contact our shop with your order number and the decal number to talk about options. The pieces will be charged at the value of the piece(s).

The graphics/wrap are not sticking?

The main issue we are met with is the decals coming loose and desticking from the surface. Because of the super sticky adhesive we use, 99 times out of 100, this is an installation issue.

To avoid this:
1) Watch our videos on Youtube .
2) CLEAN the entire surface with denatured alcohol to remove all waxes, oils, etc.
3) Clean your hands well to remove all oils and sweat.
4) Use moderate to firm pressure to lay the decals down.
5) Heat the decals with a hiar dryer or heat gun to completely activate the adhesive. (practice this with some of the spare sections of vinyl to ensure that you do not burn or shrink the vinyl.

If it appears that it was due to our error, please email pictures to one of our designers at [email protected] and we will make a determination based on the information that is provide.

The wrap you sent me doesn’t fit my sled or bike?

There are two thing to look at here:

1) A couple of pieces are not fitting right in a corner or edge.
A) Due to plastics warping over time and variations from mold to mold, your wrap may not line up perfectly everywhere. In the event it does not, use an exacto knife to trim to fit where needed. Check out our video on Youtube.

2) This wrap does is not for my sled at all.
A) Please do not attempt to install the wrap.
B) Contact the shop ASAP at [email protected] with your order number, pictures, and a picture of the data tag for your sled. If the error is ours, we will send you a return label and deliver the replacment as soon as the
incorrect one is received back at our shop. If it is determined that the mistake is not on our end, we will replace the incorrect portions at your expense. Please note that regardless of how unfortunate these situations are, we
cannot be held responsible for a customer ordering a wrap for the wrong sled. Any accomidations we choose to make in these instances is entirely at our discretion and is on a case by case basis.

I decided didn’t want my wrap/graphics, can I get a refund?

No, we do not have a refund policy for unwanted product. The work we do is custom to each of our customers. In almost all cases the product cannot be resold because of the unique nature of the product.